Sewing Accessories | Notions | PacCana Enterprises

Bodkin with Teeth

Metal bodkin. Use to pull elastic, cording, etc. through casings. Similar to tweezers; "pinch" the item being pulled, and slide the ring down to hold it in place. Approx. 2.75" long (Old Code : D1-CH #008)

Part Number: D1-SSB-01

Long Ballpoint Bodkin

Long ballpoint bodkin for threading narrow trims & ribbon. 6"

Part Number: D1-CH #011

Metal Looper, Short

Metal Looper for threading elastic, trims & ribbon. 2.5" long

Part Number: D1-CH #007

Loop Turner with Hook

Loop turner with hook. Use to make spaghetti straps, button loops, and fabric tubes for things like frogs and knot buttons. To use, insert through fabric tube; hook the end, close the latch, and pull the hook-end back through the tube. Approx. 10.5" total length

Part Number: D1-CH LT-40

Awl

Awl. Use to puncture holes in a variety of materials, or enlarge existing holes. Approx. 5.25" long

Part Number: D1-CH 1337

Hole Punch Cutter

Hole punch cutter - use to punch holes in fabric, thin leather, etc. Includes 6 interchangeable punch sizes 1.5mm 2mm 2.5mm 3mm 3.5mm 4mm

Part Number: D1-MH 0334-9006

Snap Pliers

Pliers - use for setting large sleeper snaps (PacCana item B890A), or 4mm eyelets. *Please note these are not intended for commercial or industrial use. BUY 3 OR MORE AT $7.55 each

Part Number: D1-DW NS6410

Pressing Ham

Pressing Ham - use for pressing curved seams, shoulders, hips, bust, etc. Wool covering on one side for pressing fabrics that require low to medium temperatures, and a cotton covering on the other side for fabrics requiring medium to high temperatures. Approx. 8" long x 5" wide (at base) Colours may vary. Dritz brand

Part Number: D1-PDZ 562

Sleeve Roll

Sleeve roll. Makes ironing sleeves easier!

Part Number: D1-H SAUSAGE

Press Cloths

Vue-thru press cloths. Protects fabric from shine, scorch, water spots & pressing marks. Reduces resin build-up on iron soleplate when applying iron-on interfacings, patches & appliques. 2 pcs. 30" x 13" Prym Dritz brand

Part Number: D1-PDZ 598

Sew Smooth

Sew Smooth thread and sewing machine lubricant. Use for super smooth hand and machine sewing. Sew Smooth allows fabrics to be sewn at high speed reducing the possibility of thread breakage. 30ml

Part Number: D1-H SEW SMOOTH

Go Fuzz (formerly D-Fuzz It)

Go Fuzz (formerly D-Fuzz It). Fuzz/pill remover comb. Removes fuzz from fabric, coats, blankets and sweaters made from wool, cashmere, or acrylic. To use, brush against fabric while holding fabric tight. Tailorform brand

Part Number: D1-202

Lint Roller

Lint roller with 2 refill rolls.

Part Number: D1-K2234

Thread Cutter Pendant

Antique brass thread cutter. Each slotted groove contains a sharp stainless steel blade. Attach cord or ribbon (not included) and wear as a pendant, or insert stem into thread spool to keep it handy. 28mm diameter

Part Number: D1-DW TCP28

Thimbles

Thimbles with non-slip top. Available sizes: Small - 15mm Medium - 16mm Large - 17mm Extra Large - 18mm Prym or Dritz Brand

Part Number: D1-PDZ 162

Thumble

Thimble made for thumbs. Great for quilting. One size

Part Number: PC127

Iron Off - Hot Iron Cleaner

Hot Iron Cleaner removes starch, fusible webs & detergents. Non-abrasive. 20g Prym Dritz Brand

Part Number: D1-PDZ 575

Bamboo Point Turner

Bamboo Point Turner Use the round end to make temporary creases and to hold seams open when pressing. Use the pointed end to guide fabric when machine stitching also perfect for turning points such as collar tips on apparel.

Part Number: D1-H3024048

Buttonhole & Eyelet Cutter Set

Chisel-type buttonhole knife, hole puncher & cutting mat (2"x2"). Use to cut buttonholes and punch holes for small eyelets. Knife approx. 1/2" wide Hole punch approx. 1/8" diameter Imported

Part Number: D1-CHBHCK2

Buttonhole Cutter - Plastic Handle

Buttonhole cutter with chisel-type blade. Plastic handle

Part Number: D1-H 3062030